3.1、1-4蒙牛机电安装施工组织设计-施工管理篇.doc

Installation Work of the Mengniu Arla Spray Drying Plant- Hellingeer 蒙牛阿拉喷雾干燥奶粉塔项目-和林格尔 安装工程 Method Statement 施工组织设计 The method Statement is developed on the basis of: 编制依据: Tender document of Installation Work of the Mengniu Arla Spray Drying Plant- Hellingeer; 蒙牛阿拉喷雾干燥奶粉塔项目-和林格尔安装工程招标文件； The design drawings for tendering; 供招标用的图纸资料； Relevant national and local laws and regulations; 国家和地方、行业有关的法律法规； The standards of the company; 本公司的企业标准； Practices effective and applicable obtained from the similar projects; 类似项目的行之有效并符合相关规定的实际经验。 Current national quality acceptance codes as required in the tender document; 招标文件要求的、国家现行的施工质量验收规范： Construction Acceptance Code for Industrial Metal Piping GB50235-97 《工业金属管道工程施工及验收规范》 GB50235-97 Construction Acceptance Code for Equipment Industrial Pipe Welding GB50236-98 《现场设备、工业管道焊接工程及验收规范》 GB50236-98 Construction Acceptance Code for Building Water Supply Sewage heating GB50242-2002 《建筑给排水及采暖工程施工质量验收规范》 GB50242-2002 Construction Acceptance Code for Water Supply Sewage Piping GB50268-97 《给排水管道工程施工及验收规范》 GB50268-97 Code for construction and acceptance of industrial equipment and pipe HGJ229-91 《工业设备管道防腐工程施工及验收规范》 HGJ229-91 Construction Acceptance Code for Ventilation and Air Conditioning GB50243-2002 《通风空调施工质量验收规范》 GB50243-2002 Construction Acceptance Code for Air Compressor, Fan Pump GB50275-98 《压缩机、风机、泵安装工程施工及验收规范》 GB50275-98 Technical Regulations for Building Sewage Hard PVC Piping CJJ/T29-98 《建筑排水硬聚氯乙烯管道工程技术规范》 CJJ/T29-98 Installation of Building Sewage PVC Piping 96S406 《建筑排水用聚氯乙烯管道安装》 96S406 Technical Specification of PVC-U Pipe Work for Building Drainage