广东工业大学 模具专业英语2 09E2-6.pptVIP

作业1：翻译下面短文( p.57) These polymers set after being melted to a liquid state by heating; hence the term thermosetting plastic. This process of solidifying is known as curing. During curing all the small molecules are chemically linked together to form one giant network molecule. Hence they are distinguished from the linear polymer (thermoplastics)by being called network polymers. 参考译文 这些聚合物通过加热被熔化为液态后再变为固态，因此采用术语热固性塑料。凝固的过程称为固化。固化时所有小分子通过化学反应连接起来形成巨大的网状分子。因此它们区别于线状聚合物（热塑性塑料） 而正如其名———网状聚合物。 作业2：翻译下面短文( p.57) The change from the liquid state to solid is irreversible, and