工业工程实习英语小论文.docxVIP

Hands operationClass: Industrial Engineering 101 className：Xian Yuanyuan student ID: 2010025123Hands operation, just as its name implies: two hands to work at the same time, if the appropriate, it will greatly improve the productivity. Hands operation analysis is by an operator to job content for recording and analysis technology. Through the hands operation analysis can be applied to the operation of the operator methods and steps is reasonable, division of right whether appropriate, whether there are redundant and awkward action to improve, where the material is put, where layout is reasonable, and so on, the research and improvement, in order to achieve the reduction of labor intensity, improve work efficiency purpose. 1、Hands operation analysis functionHands operation analysis function can be summarized as the following:1) To study the action of hands and balance issue 2) Explore alone in the arm type operation and improve 3) found out stretch out hand and looking for and clumsy and invalid action 4) Found that inappropriate placement of tools, materials, equipment, etc5) Make action standardization2、Precautions In the operation procedure chart analysis, should first be familiar with using the economic principle of motion, and then in the following analysis:1) Check and analysis the action right is not reasonable and redundant action? If so, the irrational and redundant action can we cancel, merger, simplified, improve and rearrangement? 2) Balance the load of the hands; make full use of his hands. Including free hand work; As far as possible with clamps grip the work piece, rather than by hand; try to use the slide device transport objects, rather than by hand, etc. 3) Try to use both hands to be operated at the same time. 4) Improve work arrangement, and make it suitable for the operation. 5) To reduce duplication of work.3、Specific examplesThis time we visited the factory Mitsubishi Electric Dalian machine manufacturing company - Machinery Manufacturing Divis