API标准（API standard）.doc

API标准（API standard） API standard test 1. Fill in the blanks The acronym for the American petroleum institute is (API). 2. The abbreviation of American materials and testing association (ASTM). 3. The English code of international standard is (ISO). 4. The abbreviation of product specification level is (PSL). 5. Long round thread casing code is (LC). 6. The code for the trapezoid casing is (BC). 7. The code name for unthickened tubing is (NU). The code name for the external thickening tubing is (EU). 9. API 5CT standard name is (tubing and casing specification). 10. API 5CT divides oil casing into group (4). The N80 steel grades include n80-1 and N80Q. The L80 steel grades include l80-1, l80-9cr and (l80-13cr). 13. API 5CT: wall thickness allowable deviation (-12.5%). The weight tolerance is (-3.5% + 6.5%) 14. API 5CT provides that the outer diameter is greater than or equal to 114.3mm oil casing, and the total length is not more than (0.2%); The maximum straightness deviation (3.18 mm) is within 1.5 m of each tube. 15. The size of the pass rod is included (the length of the diameter) and (diameter of the diameter rod). 16. API 5CT rules: J55, K55, n80-1, N80Q and P110 steel tubes require that P and S content should be less than or equal to (0.030%). 17. The effective date of API 5CT is (1 January 2012). 18. Color ring mark J55 a bright (green) n80-1 (red) P110 (white) 19. The specification of the API pipeline steel pipe that our company implements is the first (44) version. 20. API 5L pipeline steel pipe has two product specification levels, respectively (PSL1) and (PSL2). The minimum yield strength of L360 steel level is (360MPa). 22. The Q in the L360QS steel level is indicated (by the tone), S means (acid service). 23, N (positive fire) at L360NO steel, O (Marine service). 24. The experimental pressure of pipeline hydrostatic pressure should not be less than (5 seconds). 25, API 5 l of charpy impact test temperature (0 ℃). 26. The temperature of the tensile test