CATIA与UG（CATIA and UG）.doc

CATIA与UG（CATIA and UG） Both catia and uG are recommended to be proficient, at least in our company. CATIA is an excellent three-dimensional design system developed by Dassault company in France, which has been widely used in mechanical, electronic, aerospace and automotive industries. Due to the large, complex software system, not easy to grasp, like 2 d software such as AutoCAD and books about software applications and data, to be familiar with the software, not only need to slowly groping and experience in the learning and application, also need more communication with others, learn from each other. Here are some tips on how to learn and use the software. 1. Several ways of painting nuts The paper first drew the six prisms and then rotated it with a small triangle. The cylinder is drawn first, then the bottom edge of the cylinder is inverted, then the hexagon is pulled out to remove it. 2. Name of 3d parts modeling When the parts are modeled, the system will automatically be named for the parts at the beginning of its model tree, usually in Part1, Part2... Wait for default. And each time the parts are modeled, the default parts name in the model tree might be the same. Because parts are eventually introduced into an assembly drawing, parts with the same parts name cannot be called simultaneously in the assembly environment, and the duplicate name needs to be renamed. If you assemble a large part, you may encounter this problem many times. In order to avoid the unnecessary trouble, the author suggested that before modeling 3 d parts, prior to the default system components in the model tree name to will be used when the parts file name, so that not only avoid the repeated, parts name can also save of convenient parts. 3. Tolerance labeling In the engineering drawings of the parts, it is often marked as the tolerance of 39 + + 0.05. CATIA default font SICH cannot be marked as required, and it is marked with the form of phi 39 0.05. You can set the tolerance type to t