UVLayout教程（UVLayout tutorial）.docVIP

UVLayout教程（UVLayout tutorial） The first section of the fast intercept In C ED mode, the UV line is drawn The UV mode is cut open Draw green UV line in 3D mode ENTER ED mode to determine the object with the UV line cut In UV mode, the merge of objects on the edge of the UV line selected by the red line/or the green part of the already MASK will be separated The UV red line drawn under W ED mode is cancelled In UV mode, merge or draw the UV line/red line to display the connection line The UV red line drawn in 3D mode SHIFT + W UV mode for LOOP select red line/LOOP to cancel the selected red line In the M UV mode [when it has been drawn to merge the UV line/red line], point M on the object to get as close to the object as possible In the F UV mode, it is possible to relax the UV point blank with the physical algorithm SHIFT + F UV mode to loosen the UV space key after the edge is the circular PLET pull Whitespace + F UV mode continuous with the physical algorithm to relax UV and press the space to stop SHIFT + space + F UV mode continuous to relax UV with the physical algorithm and automatically lock the open edge with the purple line to stop when the space is pressed D ED mode in the UV mode SHIFT + D ED mode to uncut open objects In UV mode, the uv-mode object is reinvested in ED mode A UV mode on the point open [axial] viscosity is the function of SNAPE SHIFT + A UV mode to remove all the sticky points of SNAPE function Space ED mode, the mouse button will move the already cut object In UV mode the mouse button object moves/mouse right/mouse button is rotated Under the H ED mode/UV mode / 3D mode, the left mouse button hides objects/mouse right to hide selected objects [S reverse hide U to cancel hide] Ctrl UV mode the mouse left/medium/right movement point In ED / 3D mode, the left mouse button is rotated 360 degrees in the z-axis direction SHIFT UV mode the mouse left/medium/right brush mode move point Ctrl + SHIFT UV mode to move the point with the mouse left/me