VLAN。（VLAN。）.docVIP

VLAN。（VLAN。） Orders to record Chapter 1 VLAN configuration 1-1 1.1 VLAN profile 1-1 1.2 VLAN configuration 1-1 1.2.1 opening/closing device VLAN features 1-1 1.2.2 create/delete VLAN 1-2 1.2.3 specify Ethernet port 1-2 for VLAN 1.2.4 specifies the description character 1-3 for a VLAN or VLAN interface 1.2.5 create/remove VLAN interface 1-3 1.2.6 specifies/removes IP addresses and masks 1-3 for the VLAN interface 1.2.7 open/close VLAN interface 1-4 1.3 VLAN displays and debugs 1-4 1.4 VLAN typical configuration example 1-5 Chapter 2 the inch-user - vlan configuration of 2-1 2.1 inch-user - vlan profile 2-1 2.2-in-user-vlan configuration 2-1 2.2.1 configuration of one-user - vlan 2-1 2.2.2 configure Secondary VLAN 2-2 2.2.3 configure the mapping relationship between the inch-user-vlan and Secondary vlans 2-2 2.3 inch-user - vlan display and debugging 2-3 2.4 typical configuration of the inch-user-vlan example is 2-3 Chapter 3 GARP/GVRP configuration 3-1 3.1 GARP configuration 3-1 3.1.1 GARP agreement introduction 3-1 3.1.2 configure GARP timer parameters 3-2 3.1.3 GARP display and debugging 3-3 3.2 GVRP configuration 3-3 3.2.1 GVRP agreement introduction 3-3 3.2.2 global open/close GVRP 3-4 3.2.3 port open/close GVRP 3-4 3.2.4 configure GVRP registration type 3-5 3.2.5 GVRP display and debugging 3-5 3.2.6 GVRP typical configuration example 3-6 Chapter 1 VLAN configuration 1.1 introduction of VLAN Virtual Local Area Network (VLAN) is a technique for realizing Virtual working groups by logically dividing the devices in a LAN into a Network segment rather than physically. IEEE introduced the IEEE 802.1 Q protocol standard in 1999 to standardize VLAN implementations. VLAN technology allows network administrators to a physical LAN logically divided into different broadcast domains (or called virtual LAN, VLAN), each VLAN contains a set of computers have the same demand, due to a VLAN is a logical rather than physical partitioning, so different computers within the same VLA