vlax-curve函数（Vlax - curve function）.docVIP

vlax-curve函数（Vlax - curve function） Vlax - curve - get family functions, including the following functions: Vlax - curve - getPointAtDist Vlax - curve - getPointAtParam; Vlax - curve - getDistAtPoint; Vlax - curve - getDistAtParam; Vlax - curve - getParamAtPoint;; Vlax - curve - getParamAtDist;; Vlax - curve - getStartParam;; Vlax - curve - getendParam;; Vlax - curve - getStartPoint;;; Vlax - curve - getEndPoint;; Vlax - curve - getFirstDeriv;; Vlax - curve - getSecondDeriv;; Vlax - curve - getSecondDeriv Etc., when the use of these functions are used to curve parameters, to use these functions well, must want to understand the meanings of the curve parameter, below I will curve parameters in various curve is the meaning of the following: In a straight line, the parameter value is the distance from the starting point in the line; The value of the line starting parameter is 0, and the parameter value of the line is the length of the line. Param is in the arc, garden, ellipse, the parameter value is center to the curve starting counterclockwise rotation to that point radian value; The value of the starting parameter of the garden and ellipse is 0, the endpoint parameter is 2pi, and the arc starting parameter corresponds to the 50 yard value of the arc DXF, which corresponds to the 51 yard value of the arc DXF. Param in polylines, parameter values for calculating the sequence of points on the polyline vertex position value, the value is an integer for calculating point on the polyline vertices sequence, counting with 0 as the starting point, the decimal part as the calculating points on the poly real fragments length ratio. Param, in Spline, is a line connecting with the fitting point of Spline, which indicates the distance from the starting point of the line. The value of the starting parameter is 0, and the terminal parameter value is the total length of the line line. Vlax - curve - getFirstDeriv function is to return curve at a specified location of the first deri