丝网印刷中常见问题解答（A common problem solution in silkscreen printing）.doc

丝网印刷中常见问题解答（A common problem solution in silkscreen printing） Answers to frequently asked questions The reasons for the failure are many factors, such as screen printing, screen printing, silk printing ink, silk printing equipment, silk printing materials and operation technology. There is a single reason for the production of the silk-print fault, but more are the result of the interplay of the complicated causes. This is the authors special attention to the cause of the failure and the corresponding countermeasures. Paste version The paste version is also called block, which refers to the phenomenon of the screen printing plate of the image and the opening of the image. The appearance of this phenomenon can affect the quality of printing and can not even be printed normally when serious. The reasons for this phenomenon are intricate. The reasons for the paste can be analyzed from the following aspects. The cause of the substrate. The substrate is varied, and the quality of the substrate is also a factor. For example: paper, planks. The surface smoothness of the substrate is low, the surface strength is poor, it is easy to produce powder and hair loss in the printing process, resulting in the paste edition. The reason for temperature, humidity and ink properties of workshop. The workshop requires a certain temperature and relative humidity. If the temperature is high and the relative humidity is low, the solvent in the ink evaporates quickly, the viscosity of the ink becomes higher and the hole is plugged. Another thing to note is that if the downtime is too long, there will also be a paste, the more severe the paste will be. Secondly, if the environment is low, the ink fluidity can be easily produced. The reason of screen printing. A good screen printing plate is used before use with water rinse and dry. If it is not printed in time after making a good version, it will adhere to the dust in the preservation process. If it is not cleaned, the paste will be created.