公摊面积计算（The square area is calculated）.docVIP

公摊面积计算（The square area is calculated） How to calculate the square area Maybe when you buy a house, you will find that you actually get a much smaller amount of real estate than you buy. A buyers, Mr Zhang had consulted the author, he bought a second-hand housing, the high-rise building area of more than 160 square meters when seeing when he first entered the room only to find the area of the house is much smaller than he imagined, again how amount found to be less than 140 square meters, have this doubt there are many people at the same time, his house to buy, less thousands of yuan a square meters, more than ten thousand yuan a square meter, this a few square meters can say little less? In fact, many buyers when buying a house to buy is building area, and the equally Shared area is also included, a building as a whole equally Shared area will eventually spread to the whole house every household, so, equally Shared area is to reduce your this a few square meters of building the actual utilization factor. This time, lets take a look at how the pool area is calculated, and it can also make you have a clear account of the area of your use. What is the square area? The public area is short for the share of the Shared construction area. It and the sum of the inner area constitute the building area of a house. If the public amortization area is relatively small, the housing rate is relatively high. If the public spread area is too large, it will reduce the cost of the house. Generally speaking, the public housing area of high-rise housing is larger than that of multi-storey housing. At present, the level of high-level assessment in hangzhou is between 25% and 30%, while the multi-layer allocation area is generally around 20%. But every house is different. That is to say, the public amortization area is objectively existing, and the size of the public amortization area is determined according to the specific use and supporting condition of each house, without a specific s