变频器技术及知名厂商（Inverter technology and well-known manufacturers）.docVIP

变频器技术及知名厂商（Inverter technology and well-known manufacturers） 220 series VF control 520 and 320 are open loop vector control 720 is current vector, flux vector, closed-loop vector control Light load is called constant power (inductive load such as fan and water pump) Reload is called constant torque (mechanical load) The correct selection of motor and inverter is critical to the normal operation of the control system. The load characteristics driven by the frequency converter must be fully understood when selecting the frequency converter. In practice, there are three types of production machines: constant torque load, constant power load and fan, water pump load. 1.1 constant torque load torque TL is independent of speed n, and the TL is always constant or basically constant at any speed. For example, conveyor belt, mixer, extruder and other friction load, such as crane, hoist, etc., are under constant torque load. When the inverter drives the load of the constant torque property, the torque at low speed should be large enough and sufficient overload capacity. If it is necessary to operate at a low speed, the heat dissipation capacity of the standard asynchronous motor should be considered and the temperature rise of the motor should be avoided. 1.2 constant power load of machine tool spindle and mill, paper machine, plastic film production line of the coiler, uncoiler, such as the required torque, generally is inversely proportional to the speed, this is the constant power load. The constant power properties of the load should be in terms of the range of speed variations. When the speed is very low, the TLS cant be infinitely increased by mechanical strength, and at low speeds, it is converted to a constant torque property. The constant power and constant torque zone of load have great influence on the selection of transmission scheme. The maximum allowable output torque is constant, which belongs to constant torque speed adjustment. In the case of weak magnetic sp