外文文献翻译（Foreign literature translation）.docVIP

外文文献翻译（Foreign literature translation） English translation: The delay of the high voltage circuit breaker In this paper, The operation of the circuit breaker affects the reliability of a power system. A good indicator of the state of a circuit breaker is Its switching time. Based on this, some circuit breakers can be detected and removed before failure In addition to. In this paper, the two different circuit breakers for spring drive and hydraulic transmission are proposed for different faults The time measurement evaluation of the situation. In addition, the relationship between the time of the breaker switch and the type of failure type is also Well deduce that. Therefore, the impact of the fault trend will also be considered. Key words: circuit breaker; Maintenance; The timing; Condition assessment; reliability 1 the introduction Today, the reliability of a power system is very important, and the circuit breaker is the most important group in the power system Reliability is critical in part. Therefore, special lines and off-line measurement systems are used to evaluate The state of the circuit breaker. Their task is to report various changes in the operation of the circuit breaker. However, the circuit breaker Is a device that runs in a variety of different conditions, such as rated/short circuit current or high/low ambient temperature. It is held Time is not equal to all things. Therefore, the fault state must be distinguished from the normal operation state. However, And it doesnt seem like a trivial task. The test technique considered in this paper is the measurement of switching time of the switch, namely the so-called delayed property. To detect The time to be measured in an abnormal condition is compared with the reference time. Although this method is very old, it is rarely detected by this method, which can cause this situation The main reason is that the failure rate is very small, which is equivalent to six failures per 100 circuit breakers every year.