工业用胶的发展（Development of industrial glue）.docVIP

工业用胶的发展（Development of industrial glue） Industrial glue introduction: industrial glue adhesive is a kind of application classification, industry used for homogeneous or heterogeneous surfaces connected with adhesive technology, has a continuous stress points adhesive cloth, light weight, or seal, most of the low temperature process. Generally speaking, industrial glue has many characteristics such as high strength, high temperature range, high intensity, wide range of viscosity, low price and easy to produce. Edit this section of industrial glue classification: adhesive: Acrylic adhesive: a structural adhesive with a wide range of adhesion, including most types of plastics, slightly treated and unprocessed metal. Can be divided into two - component catalytic curing, single component UV curing or heat curing. Flexibility can be made from good to very good, with weatherability. Fast curing. Anaerobic adhesive: A single - component adhesive/sealant that can be cured only under air - free conditions. Used for thread locking, cylindrical fixation, pipe thread seal, plane seal, etc. Instant glue as: Single component adhesives, and metal surface contact can be instantly solidified. Most base materials have good bond and high strength. Can have different viscosity, solidify speed, fill the gap and surface compatibility. Epoxy resin: Can be single component or bi-component, heating and normal temperature curing. High bonding strength for most base materials, sometimes exceeding the strength of the substrate itself. The epoxy resin is very hard and has chemical resistance and weather resistance. It can be designed as conductive and conductive epoxy adhesive. Hot melt adhesive: A thermoplastic material that can be wetted and solidified after being melted in the glue equipment. Soon, it is not a real structural adhesive, but the adhesive base is very wide. Polyurethane adhesive: Single component or bi-component, good bonding properties of thermoplastic and thermosetting plastic