工作要求（Job requirements）.docVIP

工作要求（Job requirements） Electrical installation work in construction projects due to cooperate with other professional engineering and technical content is higher, requires supervision engineer should not only be familiar with the design drawings, and be familiar with related construction and acceptance procedures, specifications, knowledge of site construction management and coordination. The author has described the common problems and treatment measures in the construction electrical supervision for several years. Common problems in design drawings At present, the design and construction time of high-rise buildings are very fast. In the past, the electrical design time of high-rise buildings usually took two or three months, and now it is usually about one month. The design drawing has not been carefully reviewed, and the basement construction has been fully expanded. Enter the standard layer and work at the speed of every four or five days. If the work is done on a regular basis, it will either affect the period or even the economic benefit, or the drawings are not carefully reviewed, resulting in a large number of changes and claims. This requires the supervisor to enter the role as soon as possible, contact with the developer and design institute, and understand the project situation and design intention. After getting the drawing, I will look at the drawing carefully and organize the drawing to review, and urge the design institute to give the consultation opinion as soon as possible. Sometimes supervision company according to particular case organization came step by step with emphasis, such as the basement of the electrical equipment, embedded pipeline is more, and the general earthing body welding, construction is big, can first organization in the basement. The blue prints.the design Some design personnel fluidity big, even temporary recruitment, composition, design quality is low, service awareness is poor, the sense of responsibility is not strong, somet