油漆调色（The paint color）.docVIP

油漆调色（The paint color） Although the tone of finished product coating is varied, but still cannot meet the design and use requirement in adornment construction, need oneself to mix color. The basis for blending colors is two: one is the color of the match in words or words, which is easier for oil workers. But the color choice is very important, if the color chooses not to be suitable, the effect of color matching is not ideal. For example, the allocation of green, any yellow and blue can be mixed into medium green, but only in the yellow and blue purity of the lower green is more pure and bright. The other one is to be prepared according to the boilerplate request, the requirement is high, technical is strong, not the average oil worker can do easily. Mainly rely on practical experience, and comparing with the color swatches, we identify good plate color is made up, what kind of monochromatic ratio is roughly how many of each monochromatic then use try to match with variety of coatings. After being approved by the design and construction unit, it is applied to the same or similar coating method with the same color as the sample. The preparation method and precautions of paint color are as follows: (1) sample small sample. First of all, determine the paint sample or the color of the color of the sample, and then estimate the weight of the various colors of the paint, as the basis for the allocation of large samples. A simple method to measure weight is: will be used to match colors of paint to two or more of the loaded containers that light weigh its gross weight, color balance again -- time, after the completion of the difference between the two weighing, namely get used to the weight of the color of paint. (2) the color, should first join the paint (usage, had a little effects on color of paint), and then to paint as color tinting strength strong, slowly, to join the main paint in an intermittent, and keep stirring. Check the sample or sample, check it and check it.