硬盘知识（Knowledge of hard disk）.docVIP

硬盘知识（Knowledge of hard disk） Please computer company, different motherboard different Settings, need to map SATA interface but you have the patience to study Now the hard disk capacity is bigger and bigger, and the price is getting cheaper. For users, the hard disk space is the more of the Korean, the more the better, while installing two hard drives for computers is the most common means of amplifies. However, how to install and use dual hard drives is also a problem we must face...   double PATA hard disk installation   believe there are still a lot of people in the use of PATA (parallel ATA) interface of hard disk. The biggest feature of this type of hard drive is data transmission through flat IDE data lines. So how do you install two PATA hard disks?   1. Planning IDE devices of master-slave relationship   the mainboard are usually provides two IDE interface, can meet four IDE devices. But aside from hard drives, users typically have one or two optical drives. Therefore, to achieve better performance, you must plan for the installation of these three or four devices.   (1) + 1 drive double PATA hard disk   proposed to large capacity, high speed hard disk set give priority to plate, in the IDE interface cable; Set the other hard disk to the main disk, the optical drive is set to the disk, and the two are connected to the data line of the IDE 2 interface.   tip: the order of the system startup search startup disk is IDE 1 first, after the IDE 2. Setting the high speed hard disk to the main disk for the system disk on the IDE 1 can improve the performance of the system.   (2) + double double PATA hard disk drives   is similar to the connecting way of the above, it is suggested that in the IDE 1 in addition to pick up the high-speed hard disk as the main, this drive again by one (from disk). At the same time IDE 2 is also a hard disk and a cd-rom drive.   2. Set the hard drive and cd-rom jump line   can be seen from the above master-slave rela