防腐方法（The anti-corrosion methods）.docVIP

防腐方法（The anti-corrosion methods） The above factors will affect the corrosion current, among them, the soil resistivity is main indexes of the soil corrosivity, the smaller the soil resistivity, form a corrosion cell current intensity, the greater the corrosion rate were higher, and vice versa. At present, it is commonly used to prevent corrosion and corrosion of the insulating layer and protect against corrosion. Insulation layer according to corrosion of pipeline in regional topography, geomorphology, geology correct selection and reasonable anti-corrosion materials, commonly used at home and abroad have oil, epoxy coal tar, coal tar enamel, polyethylene fusion bonded epoxy powder, etc. Total cost of the pipeline corrosion protection shall include the following several factors (1) material, (2) construction, (3) repair, (4), (5) the cathode protection installation, 6, 7) test, design of maintenance, etc., integrated all factors mentioned above, the current domestic use is more epoxy coal tar anti-corrosion, can undertake choosing according to different requirements. The following methods are available for specific protective measures for pipeline corrosion Protective coating Corrosion resistant coating is widely used as a protective method for the corrosion control of buried pipelines. Coating as the first line of defence of corrosion control, its role is to the tube base metal from the corrosive environment of soil, at the same time provide the necessary for the implementation of the additional cathodic protection insulation condition. In addition, the pipe coating is inevitably defective after coating, operation and unloading, backfilling and operation. Corrosion protective coating Current corrosion resistant coatings for new buried pipelines include composite coatings and epoxy powder. Coal tar enamel and petroleum asphalt are rarely used in the pollution environment, and the old pipeline repair mainly is the belt and liquid coatings. Composite coating Through