颈椎调整手法（Adjustment of cervical vertebra）.docVIP

颈椎调整手法（Adjustment of cervical vertebra） The author of the adjustment of the cervical vertebra: medicine is the art of benevolence Cervical spine 1. Cervical spinal nerve distribution and its symptoms: (FIG. 6-1) / P P The characteristics of cervical vertebra (1) the diagnosis and diagnosis of the X first film of the first vertebra: 1. Draw a long line along the back of the vertebra C2. 2. Draw a long line along the back of the vertebra C7. The two extensions will be handed over at one point, forming a pair of vertical angles, and the normal cervical vertebra curve is 40 degrees from the Angle of the vertical Angle. If it is greater than 40 degrees, the cervical spine curve is too curved (extension). If it is less than 40 degrees, the cervical spine curve is straight. (2) characteristics of cervical vertebrae: (see figure 6-2) 1. The average person has 7 cervical vertebrae, 6 intervertebral plates and 35 joints. There was no intervertebral disc in the occipital, ring vertebrae (c0-c1) and ring, axis (C1 - C2). The vertebral arch is shorter, so the intervertebral pores are smaller. When the vertebral body shifts or when the yellow ligament or the posterior longitudinal ligament is thickened due to ossification, or when the intervertebral plate is prominent, it will compress or stimulate the spinal cord or nerve root. 3. Vertebral artery of the cervical vertebra; Bigger left, smaller right. From the transverse perforation of the 6th cervical vertebra, the transverse perforation of the cervical vertebra is perforated to the ring vertebra. Then turn to the front, and pass through the outer margin of the occipital membrane into the skull. Therefore, the correction of the head should be especially careful in case of accident, because the vertebral artery of the cervical vertebra is vulnerable to damage in the transverse perforation of the two sides. The intervertebral plate of a cervical vertebra can only cause a nerve to produce lesions. (iii) characteristics of cervic