阵列信息表达.docxVIP

Code码 Meaning含义 Recommended Action建议采取行动 SCSI cable error detected.的SCSI电缆错误检测。 System halted.系统停止。 This message indicates a termination or cabling problem with the system board integrated SCSI controller.该消息表明终止或布线问题，系统板集成SCSI控制器。 Check Cabling and termination检查电缆和终止 Slot x Drive Array – SMART Hard Drive Detects Imminent Failure: SCSI Port x: SCSI ID x插槽X硬盘阵列-智能硬盘驱动器检测即将失效： SCSI连接埠十：的SCSI ID x The indicated drive has reported a SMART predictive failure condition, and may fail soon.该报告显示驱动器的智能故障预警的条件，可能无法很快。 Do not replace the drive unless all other drives on the array are on-line!不要替换的驱动器，除非其它所有驱动器上的数组在线！ Back up data before replacing drive(s).备份数据之前，更换驱动器（县） 。 Slot x Drive Array – Drive Parameter Tracking Predicts Imminent Failure.插槽X硬盘阵列-驱动器参数跟踪预测即将失效。 The following device(s) should be replaced when conditions permit:下列装置（县）应改为条件许可时： Do not replace drive unless all other drives on the array are on-line! Back up data before replacing drive(s).不要替换硬盘驱动器，除非其它所有的数组在线！备份数据之前，更换驱动器（县） 。 MP predictive failure threshold exceeded condition. M标准普尔预测故障阈值超过了条件。 The indicated drive may fail at some time in the near future.指定的驱动器可能无法在一段时间在不久的将来。 Slot x Drive Array – to improve signal integrity, internal SCSI connector should be removed if external drives are attached to the same SCSI port (followed by further details).插槽X硬盘阵列-以提高信号完整性，内部SCSI连接器应去掉如果外部驱动器连接到相同的SCSI端口（其次是进一步的细节） 。 Follow the remaining instructions in the POST message.执行剩下的指示后的信息。 Slot x Drive Array – Physical Drive Position Change(s) Detected – Logical drive configuration has automatically been updated.插槽X硬盘阵列-物理驱动器位置变化（县）检测-逻辑驱动器配置已经自动被更新。 (RESUME = F1 KEY) （简历= F1键） This message indicates that logical drive configuration has been updated automatically following physical drive position changes.该消息表明逻辑驱动器的配置已自动更新下列物理驱动器的位置变化。 Select F1 key to resume.选择F1键恢复。 Slot x Drive Array – Optimal SIMM (Memory Module) problem detected (followed by one of the follo