STM32库函数350与相关寄存器控制标志位对应汇总--ADC.docx

下载文档

26
0
约5.78千字
约 5页
2017-07-17 发布于重庆
举报
版权申诉
保障服务

STM32库函数350与相关寄存器控制标志位对应汇总--ADC.docx

1、本文档共5页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

STM32库函数350与相关寄存器控制标志位对应汇总--ADC

STM32 ADC库函数与相关寄存器控制标志位对应汇总ADC_Private_FunctionsFunctionsvoid?ADC_AnalogWatchdogCmd (ADC_TypeDef *ADCx, uint32_t ADC_AnalogWatchdog)?Enables or disables the analog watchdog on single/all regular or injected channels. ADC_CR1->AWDSGLADC_CR1->AWDENADC_CR1->JAWDENvoid?ADC_AnalogWatchdogSingleChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel)?Configures the analog watchdog guarded single channel. ADC_CR1->AWDCH[4:0]void?ADC_AnalogWatchdogThresholdsConfig (ADC_TypeDef *ADCx, uint16_t HighThreshold, uint16_t LowThreshold)?Configures the high and low thresholds of the analog watchdog. ADC_HTRADC_LRTvoid?ADC_AutoInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalStateNewState)?Enables or disables the selected ADC automatic injected group conversion after regular one. ADC_CR1->JAUTOvoid?ADC_ClearFlag (ADC_TypeDef *ADCx, uint8_t ADC_FLAG)?Clears the ADCx's pending flags. ADC_SRvoid?ADC_ClearITPendingBit (ADC_TypeDef *ADCx, uint16_t ADC_IT)?Clears the ADCx's interrupt pending bits. ADC_SR->AWDADC_SR->EOCADC_SR->JEOCvoid?ADC_Cmd (ADC_TypeDef *ADCx, FunctionalStateNewState)?Enables or disables the specified ADC peripheral. ADC_CR2->ADONvoid?ADC_DeInit (ADC_TypeDef *ADCx)?Deinitializes the ADCx peripheral registers to their default reset values. NONEvoid?ADC_DiscModeChannelCountConfig (ADC_TypeDef *ADCx, uint8_t Number)?Configures the discontinuous mode for the selected ADC regular group channel. ADC_CR1->DISCNUM[2:0]void?ADC_DiscModeCmd (ADC_TypeDef *ADCx, FunctionalStateNewState)?Enables or disables the discontinuous mode on regular group channel for the specified ADC. ADC_CR1->DISCENvoid?ADC_DMACmd (ADC_TypeDef *ADCx, FunctionalStateNewState)?Enables or disables the specified ADC DMA request. ADC_CR2->DMAvoid?ADC_ExternalTrigConvCmd (ADC_TypeDef *ADCx, FunctionalStateNewState)?Enables or disables the ADCx conversion through external trigger. ADC_CR2->EXTTRIGvoid?ADC_ExternalTrigInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalStateNewState)?Enables or disables the ADCx injected ch