卷盘包装 - Murata.PDF

Fixed Inductors 固定电感器 Precautions 注意事项 1. During storage, the products must be kept in an 1. 在储存阶段，产品必须保持远离过热的温度、过高的湿 environment away from excessive high temperatures, high 度、灰尘和有害气体等可能影响可焊性效果的环境。 humidity, dust and noxious gases which may affect 2. 接线端不能用手指直接处理。这是为了防止降低可焊性。 solderability. 3. 产品不能掉到地板上。这是为了防止损坏铁氧体芯。 2. Terminals should not be handled with fingers. This is to 4. 当工作电流中含有可以听到的频率成份时,电感可能产生一定 prevent deterioration in solderability. 的噪音。虽然这个现象对电感的特性没有影响，但在实际 3. Products should not be dropped on the floor. This is to 应用时请确认有无问题。 prevent damage to the products. 4. Although electrical performance is satisfactory, audible noises may be made if audio frequency ingredient is contained in current. Before using, please make sure there aren’t any problems with operating. Part Numbering System 零件号码系统 □□□□□□-□□□□□□=□□ ：Package Code 封装编码 ：Inductance value and tolerance or Registar number 电感值，公差及登录号 ：Type name or Type code 型号名及型号编码 请参看各页确认正确的零件号码 Please see the exact part number on individual catalog page. ■INDUCTANCE TOLERANCE CODE 电感值公差 Code Tolerance J 5% K  10% L  15% M 20% N 30% ■CODING 译码 INDUC