《工程热力学》试卷（Engineering thermodynamics）.docVIP

《工程热力学》试卷（Engineering thermodynamics） Engineering thermodynamics 1. A single choice question (15 points for each of the 15 questions) Only one of the four options listed in each of the questions is eligible for the title, and please fill in the following brackets. There is no separation between choice, multiple choice, or not. 1. The reference point of thermodynamic temperature scale is () A. The boiling point of water C. the critical point of water 2. Absolute pressure p, the relationship between pressure pg and environmental pressure pa is () Amy polumbo + pg - pa = 0 p. + pa - pg = 0 C.p - pg - pa = 0 D.p a + pg + p = 0 3. The relationship between wt and volume work w is () Aleem walji t + + p2v2 p1v1 - w = t + 0 B.w p1v1 p2v2 - w = 0 C.w t - p1v1 + p2v2 - w = 0 D.w t - p1v1 p2v2 + w = 0 4. Molar gas constant R () A. it has to do with the type of gas, not the state B. It has to do with the state of the gas, not the type of gas C. It is related to the type and state of gas D. It has nothing to do with the type and state of the gas 5. The following expression only applies to an ideal gas reversible process () A. B. C.T ds = du + w2 D. 6. In the heat process of the known ideal gas, the change in internal energy is equal to 0. The characteristic of this process should be (). A. constant pressure b. fixed temperature C 7. The carnot cycle, as shown in FIG. 7, has a cyclic release of heat q2 = (). A. B. C.T 2 Δ s34 Which 2 Δ s21 The critical state of water vapor on the state parameter coordinates graph is () A. The intersections of the line of the fixed line C. The intersect of the fixed line family The pressure of the superheated steam, the pressure of the pressure of the volume v, the pressure of the saturated vapor corresponding to the temperature. Amy polumbos p p. p s D. c. acuities were v v 10. The Mach number () of airflow in the tapered nozzle. A. Can only be less than 1 and B. Only less than 1 or 1 C. Can only be greater than 1 D. It can only be greater tha