LED防水灯选择（LED waterproof lamp selection）.docVIP

LED防水灯选择（LED waterproof lamp selection） Home-made waterproof LED lights are now mostly 54, and the main thing about waterproof lights is their stability. However, there are several aspects to make waterproof lamp: First and foremost of course is the switching power supply. The normal practice is to use a power source with PFC like I (hahaha since blowing up the AD), one of the most important reasons for the waterproof lamp is often a dozen series in tandem. In this case, the interference of the power supply will be extended, which may affect the signal directly, as the lamp occasionally flicker and so on. Of course, you can do it with software but you cant eliminate it completely. How do you deal with the details? And the PFC switching power supply is more efficient than the normally unpacked open source. So the price is more expensive, for example, if you have a 150W switch with no PFC, then you have to go to 300 with a PFC. But some manufacturers will not take this into account to maximize profits. Two, is the choice of lamp bead. Because domestic LED is subject to the price factor to use the person is relatively few. Generally, only large companies use it, but as production costs (mainly led bulbs) fall, its not far off. General domestic produced light beads in my own understanding seems to be the best quality should belong to tian xin (and some I dont know), as Taiwan has Addison, in the United States Cree (stage light is also less), osram osram semiconductor with South Korea, etc. This is the most important link that affects the most important cost of a desk lamp (over 50%) and the luminous efficiency of life. At least 70 percent of the selection of a light-emitting lamp is used. It was found that many customers in China bought lamps for other prices. (the so-called day macro chip LED me know the lowest price of 3 yuan 3 w), if you dont know what is you price the lower the pressure of their losses, the more because of good light bead and poor light bead for the