PCD刀具（PCD cutting tool）.docVIP

PCD刀具（PCD cutting tool） PCD super hard cutter is made of super hard material PCD (polycrystalline diamond) and cutter matrix through special process. PCD cutting tools with high hardness, good wear resistance, high machining efficiency, low friction coefficient, heat conduction performance is superior, is mainly used for processing of aluminum alloy, copper alloy and other non-ferrous metal and wood material, hard non-metallic materials, etc. Because of the extremely high hardness of PCD tools, aluminum parts and other non-ferrous metal alloys, the service life is high, and the average life span is about several thousand pieces of workpiece, over 10,000 pieces. Our company produces the product quality good price, the warm service, welcome the new and old customer consultation negotiation! CBN superhard cutter is a tool made of super hard material CBN (cubic boron nitride) and cutter matrix through special process. The CBN cutter has extremely high hardness and excellent thermal stability, especially the red hard and high, which can still maintain its good cutting performance under the high temperature of 1000 degrees, and adapt to the need of high speed cutting. Widely used in automobile manufacturing, aerospace, mechanical processing industry. Welcome new and old customer consultation! Coated tools are in good strength and toughness carbide or high speed steel (HSS) substrate on the surface, using the method of vapor deposition coated with a thin layer of abrasion resistance good refractory metal or nonmetal compound (can also be coated in ceramics, diamond and cubic boron nitride superhard materials such as blade). The coating as a chemical barrier and thermal barrier reduces the diffusion and chemical reaction between the cutter and the workpiece, thus reducing the wear of the crescent. Coated tools has high surface hardness and wear resistance, stable chemical properties, good heat resistance to oxidation, low friction factor and low thermal conductivity charact