ProE精度（ProE precision）.docVIP

ProE精度（ProE precision） ProE relative accuracy and absolute accuracy setting time: 2012-03-22 Author: Die Alliance Network Click: 501 comment: 0 fonts: T|T In Pro/ENGINEER, you can use the Accuracy command to modify the accuracy of a part or component. The accuracy of the part is a relative value of the part size, the effective value range is from 0.01 to 0.0001, and the default value is 0.0012. Note that when you increase the accuracy of parts (reduce the relative accuracy of the value), the parts will be longer in life. You can modify the configuration file option accuracy_lower_bound to modi