EAD-第七章_有限状态机设计题库.pptVIP

CASE STX IS WHEN st0 = IF DATAIN = 1 THEN STX = st1; END IF; WHEN st1 = IF DATAIN = 0 THEN STX = st2; END IF; WHEN st2 = IF DATAIN = 1 THEN STX = st3; END IF; WHEN st3= IF DATAIN = 0 THEN STX = st4; END IF; WHEN st4= IF DATAIN = 1 THEN STX = st0; END IF; WHEN OTHERS = STX = st0; END CASE ; END IF; END PROCESS COMREG ; COM1: PROCESS(STX,DATAIN) --输出控制信号的进程 BEGIN CASE STX IS WHEN st0 = IF DATAIN = 1 THEN Q = 10000 ; ELSE Q=01010 ; END IF ; 接上页 接下页