Apparent molar volumes of aqueous sodium trifluoromethanesulfonate and trifluoromethanesulfonic acid from 283 K to 600 K and pressures up to 20 MPa：（表观摩尔体积的水钠trifluoromethanesulfonate trifluoromethanesulfonic酸从283 K到600 K和20 MPa压力）.pdfVIP

Journal of Solution Chemistry, Vol. 26, No. 3, 1997 Apparent Molar Volumes of Aqueous Sodium Trifluoromethanesulfonate and Trifluoromethanesulfonic Acid from 283 K to 600 K and Pressures up to 20 MPa Caibin Xiao and Peter R. Tremaine* Received October 22, 1996; revised February 3, 1997 Relative densities of NaCF3SO3(aq) at molalities 0.073 - m/(mol-kg -l) - 1.68 were measured with vibrating-tube densimeters from 283 K to 600 K and from 0.1 MPa to 20 MPa. Relative densities of HCF3SO3(aq) at molalities 0.12 m/(mol-kg -~) 2.1 were determined at temperatures from 283 K to 328 K at 0.1 MPa. Apparent molar volumes calculated from the measured densities were represented by the Pitzer ion-interaction treatment. The temperature and pressure dependence of the standard partial molar volume and the second virial coefficients in the Pitzer equation were expressed by empirical expressions in which the compression coefficient of water and temperature were used as independent variables. The conventional standard partial molar volumes V~ -, aq) from T = 283 K to 573 K were calculated from the experimental values for V~ aq) and known values for V~ +, aq). The values of V~ , aq) at temperatures from 283 K to 328 K obtained from the values of V~ aq) and V~ aq) agree to within 1.2 cmLmol-k KEY WORDS: Apparent molar volume; density; trifluoromethanesulfonate. 1. INTRODUCTION Trifluoromethanesulfonic