EK-1-15-R海立HIGHLY安全门式开关.pdfVIP

EK SERIES SAFETY DOOR SWITCH Description The EK series is a tongue (or key) operated safety interlock switch designed to fit at the leading edge of sliding, hinged or lift-off guards. With its dual entry slots and rotatable head, the versatile EK series can offer up to eight different actuator entry options. Operation of the switch is achieved through the insertion of a specially profiled stainless steel key that is permanently mounted to the guard door. Available with one N.C. safety contact and one N.O. auxiliary contact or two N.C. contacts, the EK series is sealed to IP67 and has various conduit entries. A blanking plug is supplied for the unused key entry. Available accessories include a 90° actuator. Features •Fits on 25mm tubing, ideal for small, light weight guards •Contacts: Slow action 1N.C. /1N.O; 2N.C.; snap action 1N.C./1N.O. •Positive opening mechanism •Double-insulation structure •Eight possible actuator entry points, easy to install •90° and straight key •IP67 enclosure rating •Robust stainless steel keys Specifications Standards EN60947-5-1, UL508, EN50047, EN1088 Approvals cULus, CE Positive Opening Operation NC Contact Utilization Category AC15 A600 Thermal Current 10A Rated Insulation Voltage 600V AC Rated Impulse Withstand Volt 2500V AC Insulation Resistance 100MΩ min. (DC 500V) Contact Resistance 25m Ω .nmax. (initial) Travel For Positive Opening Various (see Product Selection table) Max Actuation Frequency 2 cycle/sec Enclosure Material UL approved glass-filled polybutylene terephthalate Actuator Material Stainless