建筑力学（Architectural mechanics）.docVIP

建筑力学（Architectural mechanics） Problem of building mechanics 1. Fill in the blanks The balance of an object is the condition of the object __________ or ________. 2. The necessary and sufficient conditions for the equilibrium of the horizontal exchange force system are: _____. The force polygons of each force in the force are composed of the force polygon. 3. A block of weight 600N, on the flat surface of the non-smooth surface, the friction coefficient f = 0.3, with a thrust of 150N on the left, and a tendency of the block to slide to the right. Fmax = __________, so the block is in a static state, and its F = __________. 4. The rigid body in the process of translation, the __________ the same at every point on it, each instantaneous, each point has __________ the speed and acceleration. 5. AB rod quality is m, length of L, crank O1A, O2B quality, and O1A = O2B = R, O1O2 = L, when phi = 60 °, O1A bar around O1 axis rotation, angular velocity omega is constant, then the instantaneous AB the inertia force of rod should add size for the..., direction for __________. 6. The ratchet mechanism is shown here, and if the weight of the pawl AB is not used, then the action line of the constraint reaction of the hinged support of the pawl A shall be along ____________ when the system is in balance. 7. If the magnitude of a force is the same as the projection of the force on a certain axis, the relationship between the force and the axis is ____________. 8. Shift the force to point B and its additional force moment is ____________. 9. The velocity projection theorem is the projection of any two points at any two points in the rigid body motion. 10. A rigid body that is parallel to a fixed plane as a plane motion, and its position as a straight line perpendicular to the fixed plane is all in the form of ____________. 11. In gear transmission, if the driving wheel Ⅰ and the speed of the driven pulley Ⅱ n1 and n2, respectively, then the two gear transmission ratio formula expresse