机床代码（Machine code）.docVIP

机床代码（Machine code） 1 inch = 25.4 mm The boring cycle G85 precision boring cycle G76 1. Instruction format: G85 Function: this loop is used for boring Description: X_Y_ : hole bit data Z_ : distance from R point to hole R_ : distance from the initial position to the R point F_ : cutting into feed speed K_ : repeat times Along the X and Y axis positioning, fast moving to rumet point, and then from R to Z perform boring, when arrived at the bottom of the hole, the cutting feed, and then return to the R. (it instruction is different from other - from the bottom of the hole back to the reference plane R, Z) for cutting feed way Rotate the spindle using the auxiliary function M code before specifying the G85. When the G85 instruction and M code are timed in the same program segment, execute M code while the first positioning action, then the system processes the next boring action. K: when specifying the number of repetitions K, only execute M code for the first hole, not the M code for the second or subsequent hole. For zero, not to perform the drill, only change the mode. When the length of the tool is offset G43 G44 or G49 in the fixed cycle, the offset is added while locating to R point. case The M3 S100 spindle starts to rotate G90 G90 G85 x300.y - 250. Locate, boring 1 hole, then return to point R Y - 550. Locate, boring 2 holes, then return to the R point Y - 750. Locate, boring, and then return to R X1000.; Locate, boring 4 holes, then return to the R point Y - 550. Locate, boring 5 holes, then return to the R point G98 Y - 750.; Locate, boring, and then return to the original position plane G80 G80 G91 X0 Y0 Z0; Go back to the reference point The M5. The spindle stops spinning limit Cancellation: unable to specify the 01 group G code G00, G01, G02, G03 or G60 in the same segment, otherwise G73 will be cancelled. Tool bias: the tool radius bias is ignored in the fixed loop mode. Two, boring cycle G76 Instruction format: G76 X_ Function: the fine boring cycle is su