板木支撑计算（Board support calculation）.docVIP

板木支撑计算（Board support calculation） Board template (wooden support) calculation book Use wooden roof support form scaffolding, calculated according to the specification for design of timber structure (GB50005-2003), concrete structure design code (GB50010-2002), load code for the design of building structures (GB 50009-2001), Jiang Zhengrong the construction calculation handbook, building construction handbook (the fourth edition), etc. I. parameter information Template support parameters Horizontal spacing or spacing (m) : 0.800; Longitudinal distance (m) : 0.800; The calculation height of the template bracket (m) : 3.600; The column is made of logs: Diameter of log small head (mm) : 80.000; Diameter (mm) : 100.000; Width of the diagonal bracing section (mm) : 30.000; Diagonal height (mm) : 40.000; Hat wood section width (mm) : 40.000; Height (mm) : 80.000; Distance (mm) : 500.000; Plate bottom support form: square wood support; Distance of square wood (mm) : 300.000; Section width of square wood (mm) : 50.000; Section height of square wood (mm) : 100.000; 2. Load parameters Template and plank weight (kN/m2) : 0.350; Self-weight of concrete and steel (kN/m3) : 25.000; Load standard value of construction uniformly distributed (kN/m2) : 2.500; Load standard value of dumping concrete (kN/m2) : 4.000 3. Floor parameters Calculation thickness of floor slab (mm) : 110.000; 4, the base wood parameters Wood for wood: fir; Square wood elastic modulus E (N/mm2) : 9000.000; Design value FM (N/mm2) : 11.000; Fv (N/mm2) : 1.400; 5. Wooden parameters of the hat Wood of the hat wood: fir; Square wood elastic modulus E (N/mm2) : 9000.000; Design value FM (N/mm2) : 11.000; Fv (N/mm2) : 1.400; 6. Diagonal bracing parameters Wood for inclined support wood: fir; Square wood elastic modulus E (N/mm2) : 9000.000; Fv (N/mm2) design value of square wood compressive strength: 11.000; 7. Column log parameters Wood for column logs: fir; Elastic modulus E (N/mm2) : 9000.000; The design value of