焊接命令流（Welding flow）.doc

焊接命令流（Welding flow） finish / CLEAR! Clear the database, create new files / FILNAME, EXAMPLE30! Change job name ! Thermal analysis ! Establish a finite element model / PREP7! preprocessor ET, 1, PLANE77! Planar thermal unit ET, 2, SOLID90! Space thermal unit V = 0.005! Welding speed LENGTH = 0.05! The steel plate is length along the weld line L_NUMBER = LENGTH/V! Number of segments along the weld line MPTEMP, 1,0,300,600,1000,1300,2000! Define the material model, the thermometer MPDATA, DENS, 1,1,7859,7770,7659,7600,6750,6750! The density of MPDATA, DENS, 2,1,7859,7770,7659,7600,6750,6750 MPDATA, C, 1,1,450,514,967,1370,2800,2000! Specific heat ,1,450,514,967,1370,2800,2000 MPDATA, C, 2 MPDATA, KXX, 1,1,67,53,39,31, 20, 20! Conduction coefficient MPDATA, KXX, 2,1,67,53,39,31,20,20 The RECT, 0,0.10, 0,0.01! Because of symmetry, create a 1/2 entity model K, 5,0.002 K, 6,0.002, 0.002 K, 7,0.00662, 0.01 K, 8,0.00339, 0.01112 K, 9,0,0.0115 7,9,8t, A, 1,5,6,7,9 AGEN, 2, 2 ASBA, 1, 2, AGLUE, ALL K, 20,0,0.00385 20,0.008 CIRCLE,,,, 90 20,0.012 CIRCLE,,,, 90 ASBL, 3, 4 ASBL, 2, 5 ESIZE, 0.00075 SMRTSIZE, 7 MSHAPE, 1 AMESH, 3,5,1 ESIZE, 0.003 AMESH, 1! Divide the unit EXTOPT, ESIZE L_NUMBER EXTOPT, ACLEAR, 1 MAT, 1 VEXT, 3,5,1,,, LENGTH! Squeeze out MAT, 2 VEXT, 1,,,,, LENGTH NUMMRG, NODE! Merge the two extruded positions with overlapping positions ALLS FINISH ! Thermal analysis solution ! The initial temperature is applied to the steady state heat analysis / SOLU! Enter solver AUTOTS, ON! Open the automatic time step OUTPR, NSOL, ALL! Output control OUTRES, NSOL, ALL KBC, 1! Step load ANTYPE, TRANS! Transient analysis TIMINT, OFF! Closing time integral NSUBST, 4! Substep number D, ALL, TEMP, 20! Initial temperature TIME, 0.01! time To SOLVE! answer ! Kill weld element ESEL, S, MAT,, 1! Selective weld element EKILL, ALL! Kill the unit ESEL, ALL TIME, 0.02 SOLVE ! Start to activate the weld unit and conduct transient thermal analysis TIMINT, ON THER! Open the time integral for