dfgh（dfgh）.docVIP

dfgh（dfgh） Preparation of silicate cement ingredients and raw materials (III) [teaching materials] The 2007-1-4 authors: Iv. Ingredients process 4.1 ingredients technology and ingredients: 1. Ingredients: according to the calculation results of the ingredients, the various raw materials are measured according to the required matching process. 2. Ingredients: Sharpening bin ingredients: the process of feeding the raw material at the base of the grinding head and feeding directly into the grinding mill. The common process flow is shown below: Base ingredients: the raw material is unloaded directly at the bottom of each round base, and the feedstock is proportionally matched to the same conveying equipment after metering. The material can then be directly in the mill or after transhipment. At present most of the new dry cement enterprises adopt the toppings. Set up raw material yard, prehomogenization and auxiliary raw material yard, the yard, and built a row of ingredients library between raw meal grinding, its specifications than the average small for original materials storehouse, bigger than grinding head warehouse, respectively all kinds of raw materials into the library, in the bottom of the library and discharged after measurement by the same transportation equipment into the ground. 4.2 measurement in the mixing process Measurement: the weighing of a continuous feed flow to determine a set of operations for the purpose of a value. Metering and feeding equipment: most metering equipments have the function of metering and feeding (feeding). The few metering equipments are only the metering function, which should be combined with the feeding equipment. Commonly used measurement and feeding equipment: The old equipment Disc feeder Electromagnetic vibration feeder Belt feeder Simple electronic means feeder The new equipment Constant speed weighing scale The speed regulating ration feeding electronic belt is described Weightlessness said Nuclear claims (matching feed