以3E法进行多用途建筑物的安全和保安管理.pdfVIP

Safety Security Management through 3E Gryphon SOU School of Graduate Studies Asia International Open University Macau Special Administrative Region, People’s Republic of China GryphonSou@AIOU.edu Abstract Risk Management in different built environments is not an easy job. Risk Management in a single built environment of multiple occupancies is not only uneasy but also an unfailing job. Building Officials always face a dilemma in the Safety and Security Management of such built environment. In this paper, a 3E Approach is introduced to the Building Officials as a safety and security solution. Keywords: 3E; Detention Facilities; Density Elimination; Hardware Enhancement; Software Enrichment. 1 Introduction Risk Management of a building with multiple occupancies is based on the analysis of the Compound Risks of some Critical Incidents under the Total Concept Approach. Analyzing risks in 3D (Density of Detention + Defects of Hardware + Deficiency of Software), the Risk Priority Indicator enables the Building Officials to assess the Compound Risk Level the existing Detention Facilities at 3 levels, High, Medium or Low (Exhibit 1). Exhibit 1: Risk Analysis in 3D RPI = DD*HD*SD Risk Priority Indicator = Detention Density x Hardware Defect x Software Deficiency (Source: /process/download.jsp?file=200503-98) Under resources constraint, priority can be accorded to the remedy of Detention Facilities of High Risk. The possible solutions could be 3E: Elimina