基础接地（Foundation Grounding）.doc

基础接地（Foundation Grounding） Lightning protection and grounding concealment engineering construction scheme (2011-07-07 11:00:13) reprint print Tags:. First, lightning protection and grounding system instructions: The grounding system of all kinds of grounding systems adopts the TN-S system, and the design requires that the grounding resistance is no more than 1 ohms. Pile foundation and pile cap and beam steel mesh welding connected to form the basis of reliable grounding the grounding device, lightning protection downlead reinforced by column or shear wall in two with a diameter of 16 mm above, welding with upper and lower welding and roof lightning protection, grounding device, installed lightning protection belt is arranged in the roof wall daughter, concrete frame building the reinforcement in the network and lightning with reliable connected to form a lightning arrester, all outstanding roofing metal components or piping shall be welded and communicated with the roof lightning belt in the bathroom for local equipotential bonding. Two, construction deployment: 2.1 construction process: basic grounding electrode welding, lead down line, pressure equalizing ring welding, roof lightning protection belt welding, equal equipotential bonding, ground test, well construction, ground resistance test 2.2 construction progress control point: The 2.2.1 level of grounding body and pile pile four main reinforcement concrete pouring pile inserted in the welding operation to beam outlet elevation. The 2.2.2*** column base level grounding body welding column inserted in the basal layer of rebar after * * *. 2.2.3 the local equipotential bonding of each floor is inserted into the floor after binding. 2.2.4 roof lightning strips are installed after the top of the civil structure is inserted. 2.2.5 test well construction is inserted after the top of the civil engineering structure. 2.6 phase test grounding resistance value: During the foundation grounding electrode construction, the