康佳K系列彩电工厂菜单调试（Konka K series color TV factory menu debugging）.docVIP

下载本文档

20
0
约6.55千字
约 18页
2017-07-22 发布于河南
举报
版权申诉

康佳K系列彩电工厂菜单调试（Konka K series color TV factory menu debugging）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

康佳K系列彩电工厂菜单调试（Konka K series color TV factory menu debugging）

康佳K系列彩电工厂菜单调试（Konka K series color TV factory menu debugging） 1) prepare a debug remote control, K / N series color TV factory debugging, remote control and user remote control the same. 2), instrument preparation required; including the oscilloscope, multimeter (resistance: DC = 20kR / V, AC = 5kR / V), pressure gauge (35kV), ammeter (0.5 level DC 3mA file), eraser, PHILPS image signal generator (PH5820 or similar). 3) before debugging, the whole machine should be preheated for more than 30 minutes, and the whole machine should be treated by degaussing. 4) check AC voltage is 220V, 50Hz sine wave; check +B voltage within the specified range (+B voltage is set according to picture tube specification and model). 5) if the memory N601 (PCF8598) and the main chip N101 (TDA9383 or TDA9380) are replaced, the data of the same type software is confirmed to be written. 1. preparation before commissioning 2. use the remote control to enter the factory menu Remote control appearance and button function, see Figure 1, press MENU (menu) key, display menu (menu display hold time is 10 seconds), before the menu has not disappeared, continuously press back to see the key five times, then enter the factory debugging menu. After entering the factory debug menu, press the MENU button again, and then select the debug menu 1 to debug menu 6, that is, FACTORYl to FACTORY6. In the debug menu, select a program available after commissioning project, select the project after debugging (selected into red) parameters can use the volume control VOL+, VOL- control of the project value, until the meet the requirements so far. When all the debugging items have been completed, and then press back to see the key again, you can quit the factory debugger and restore the normal viewing of color TV Konka super chip K / N machine factory debugging menu description Konka super chip K / N machine Factory debug menu 1 (FACTORYl) content description Screen display content Display content description Factory