利用星辉数控保丽龙加工中心加工汽车冲压模具泡沫型（The use of Kuaike CNC Machining Center Automotive stamping mold processing of styrofoam foam type）.docVIP

利用星辉数控保丽龙加工中心加工汽车冲压模具泡沫型（The use of Kuaike CNC Machining Center Automotive stamping mold processing of styrofoam foam type） Study on the peninsula NC years dedicated to automotive mold foam processing technology, effectively promote the popularization and promotion of China 3D real type automobile mould manufacturing technology, NC star according to the practical experience for many years, summarizes some of the more common processing and good art, to play good effect. Study on the peninsula NC years dedicated to automotive mold foam processing technology, effectively promote the popularization and promotion of China 3D real type automobile mould manufacturing technology, NC star according to the practical experience for many years, summarizes some of the more common processing and good art, to play good effect. The three-dimensional three-dimensional design and mold processing technology has been an effective combination of real application, part solves the problems of mold 3D design application problems, shorten the manufacturing cycle of the mold, cut the mould manufacturing cost. The core of the whole machining is the NC programming, which determines the quality and appearance of the mold to a great extent. The basic idea of our whole machining programming is entity slicing, slicing and turnover machining. The first step to take the entity is to expand, take into account the expansion allowance of the casting, then examine its machinability, then layered, programmed, laid down, and programmed. By fixing the sequence of programming operations, the programming error rate can be reduced and the training of newcomers can be accelerated. The quality of the program depends on two aspects. One is the layering before programming, and the other is the skill of programming. A good layering can improve the utilization of materials, reduce the labor intensity of workers, and facilitate the post pasting at the same time. The basic principle of stratification is that: ??? (1)