OSAL代码分析.docVIP

Ŀ¼ AccessCodeSpace.s51 2 flashDmaTrigger.s51 2 flashErasePage.s51 3 OSAL.h 4 OSAL.c 7 OSAL_CUSTOM_H 18 OSAL_Memory.h 19 OSAL_Memory.c 21 OSAL_Nv.h 27 OSAL_Nv.C 28 OSAL_PwrMgr.h 45 OSAL_PwrMgr.c 46 OSAL_Tasks.h 48 OSAL_Tasks.c 50 OSAL_Timers.h 52 OSAL_Timers.c 54 ZComDef.h 62 AccessCodeSpace.s51 NAME CC2430_READ_ANY_CODE_BYTE ; Copyright (c) 2006 by Texas Instruments, Inc. ; All Rights Reserved. Permission to use, reproduce, copy, prepare ; derivative works, modify, distribute, perform, display or sell this ; software and/or its documentation for any purpose is prohibited ; without the express written consent of Texas Instruments, Inc. MEMCTR EQU 0xC7 RSEG NEAR_CODE PUBLIC GetCodeByte FUNCTION GetCodeByte, 0203H ; ; Get a byte from code space. ; ; uint8 GetCodeByte(uint32 logical_address) ; ; Input: the logical address is just the offset of the ; byte assuming a contiguous flat address space. ; ; Returns: Byte read returned in R1 ; ; *********************************** ; *** Function is a __near_func *** ; *********************************** ; ; first we have to map the logical address to the linker address. then ; we can populate the MEMCTR register properly. ; ; logical adr linker adr Bank ; 0x00000-0x07FFF - 0x00000-0x07FFF 0 ; 0x08000-0x08FFF - 0x18000-0x1FFFF 1 ; 0x10000-0x17FFF - 0x28000-0x2FFFF 2 ; 0x18000-0x1FFFF - 0x38000-0x3FFFF 3 ; ; the logical address is in R5:R4:R3:R2 (MSB-LSB) but R5 should always be 0. ; ; we can tell the bank by shifting the entire address left 1. after that ; the third byte (R4) will contain the bank number (0-3). awkwardness ; comes in when setting the DPTR. Once the logical address is 0x7FFF ; the linker address is always begins at 0xb8000 where b is the bank ; number. ; ; GetCodeByte: ; get the bank number