proe技巧qa十则（proe技巧q a十则）.docVIP

proe技巧qa十则（proe技巧q a十则） Pro/E QA ten Author: unknown source: PRO/E engineering network 10, answer users kiffa: how to PRO/E in the 2D diagram or engineering drawings with AUTOCAD open, or vice? In pro/e2001 (2001280), you can enter the AutoCAD file of *.dwg directly into the drawing machine 9, how to record the shortcut key 8, fewer and more practical shortcuts (21 in total) 7, answer net friend David: in the example of bottle, the ends of the three spline curves are aligned six points and the center line respectively How to draw the tangent is? I give an example to answer 6, reasonable division of labor, improve mapping efficiency 5, many different versions of pro/e use the same config.pro 4. Set some of the features in the Solid and Tweak lists available 3, does not display the rotation center symbol 2, do not display the profile message box when entering Sketch mode 1, do not show the sketch grid 10, answer users kiffa: how to PRO/E in the 2D diagram or engineering drawings with AUTOCAD open, or vice? In pro/e2001 (2001280), you can enter the AutoCAD file of *.dwg directly into the drawing machine (new change) AutoCAD (here is the 2000 Chinese version) use the file format is: *.dwg, *.dxf The engineering drawing file used by pro/e is *.drw The pro/e file used by the *.sec is: In the pro/e2001 (2001280) version * enter autoCADs *.dwg (*.dwg file only) file into the pro/e sketch - can (latest change) The method is in the pro/es sketch device Sketch Data, File,... select the *.dwg from format file of AutoCAD * exporting the autoCAD file in the pro/es sketch - - cant * export the pro/es engineering drawing file to AutoCADs *.dwg and *.dxf format -- can The method is in the engineering diagram of pro/e File Save, Copy A, select the corresponding DXF or DWG format Enter the file in the AutoCAD format into the pro/e engineering drawing file -- can The method is in the engineering diagram of pro/e Insert Data File from... select the appropriate *.dxf or *.dwg file