sht71代码（Sht71 code）.docVIP

sht71代码（Sht71 code） Many people in the study of sht71, which involves the temperature and humidity acquisition is a key content, upload a section of code, share with you. * clock line: P4.5 * data line: P4.6 * using 14 bit temperature and 12 humidity *******************************************************************************/ #define SHT_SCK BIT5 #define SHT_DAT BIT6 #define SHT_SCK_OUT / / P4DIR|=SHT_SCK clock output line #define SHT_SCK_1 P4OUT|=SHT_SCK //SHT_SCK=1 #define SHT_SCK_0 P4OUT=~SHT_SCK //SHT_SCK=0 #define SHT_DAT_OUT P4DIR|=SHT_DAT / / data output line #define SHT_DAT_IN P4DIR=~SHT_DAT / / data line input #define SHT_DAT_1 P4OUT|=SHT_DAT //SHT_DAT=1 #define SHT_DAT_0 P4OUT=~SHT_DAT //SHT_DAT=0 #define Read_SHT_Dat (P4IN6) 0x01 //SHT transport initiation Void SHT_Tra_Sta (void); //SHT transport restart Void SHT_Tra_Res (void); / / write a byte to the SHT Uchar SHT_Wri_Byte (uchar value); / / a byte read from SHT Uchar SHT_Rea_Byte (uchar ACK); //SHT software reset //uchar SHT_Sof_Res (void); / / read the status register //uchar SHT_Rea_Sta (uchar, *p_value, uchar, *p_checksum); / / write status register //uchar SHT_Wri_Sta (uchar *p_value); Start / / measurement Uchar SHT_Mea_TH (uchar, *p_value, uchar, *p_checksum, uchar, mode); / / calculate value of temperature and relative humidity Void SHT_Cal_TH (float, *p_humidity, float, *p_temperature); / / dew point calculation Float SHT_Cal_DP (float, h, float, t); //SHT transport initiation //------------------------------------------------------------------------------ A transmission start / / generates _____ / ________ |_______| / / DAT: ___ / ___ / / SCK: ___| |___| |______ Void SHT_Tra_Sta (void) { SHT_SCK_OUT; SHT_DAT_OUT; SHT_DAT_1; (NOP); SHT_SCK_0; (NOP); SHT_SCK_1; (NOP); SHT_DAT_0; (NOP); SHT_SCK_0; (NOP); SHT_SCK_1; (NOP); SHT_DAT_1; (NOP); SHT_SCK_0; (NOP); } //SHT transport restart //------------------------------------------------------------------------------ Reset: DAT_line=1 and at / / c