solidworks 乱码解决（SolidWorks乱码解决）.docVIP

solidworks 乱码解决（SolidWorks乱码解决） Paste: 1. Preface: please read the SolidWorks help file AutoCAD Font Support AutoCAD When you enter the DXF/DWG project diagram file, SolidWorks displays the AutoCAD font exactly, even if your computer does not have AutoCAD installed. SolidWorks has added True Type fonts to support the commonly used AutoCAD fonts. The font is mapped using the default mapping file located in DatadrawFontMap.txt. In the default mapping file, the following list of source in engineering drawing AutoCAD SHX or True Type font. The right column enumerates the SolidWorks or Windows True Type fonts that are mapped to the AutoCAD engineering drawing text in the new SolidWorks project diagram. You can edit the mapping file as needed. When mapping additional AutoCAD fonts to SolidWorks or Windows True Type fonts, note the following: The two font list must have a simple font name and no extension name. The SolidWorks or Windows True Type font must be available in the Fonts directory of the operating system. For example, for Windows, NT, and Windows 2000, this is the system drive: WinNTFonts; for Windows 9x, this is the system drive: WindowsFonts. If the True Type font is unavailable, the default font for the SolidWorks project drawing file will be used. SolidWorks or Windows True Type fonts can also be used in the SolidWorks raw file. When you save the SolidWorks file as a DXF or DWG file, you can use the drawFontMap.txt mapping file to map any SolidWorks or Windows True Type fonts back to AutoCAD, SHX, or True Type fonts. When an engineering drawing file opens in AutoCAD, the exact font is used - the default font that does not need to be replaced. This will improve the visual realism of Engineering drawings. The following list shows the fonts that are included in the default mapping file: AutoCAD SHX or True Type font, SolidWorks or Windows True Type font Complex SWComp GDT SWGDT Gothice SWGothe Gothicg SWGothg Gothici SWGothi Greekc SWGrekc Greeks SW