IC设计中的功耗分析的流程2.docxVIP

二. 布局布线后的功耗分析现在ptpx也支持多电压域的功耗分析，并提供了一个范例脚本，这里描述多时钟域时要用到UPF，叫unified powerformat。这里不介绍。# Read libraries, design, enable power analysis# and link designset power_enable_analysis trueset link_library slow_pgpin.dbread_verilog power_pins.vlink# Create back-up power netscreate_power_net_info vdd_backup -powercreate_power_net_info vss_backup -gnd# Create domain power netscreate_power_net_info t_vdd -power -switchable \-nominal_voltages{1.2} -voltage_ranges{1.1 1.3}create_power_net_info a_vdd -powercreate_power_net_info b_vdd -power# Create domain ground netscreate_power_net_info t_vss -gndcreate_power_net_info a_vss -gndcreate_power_net_info b_vss -gnd# Create internal power netscreate_power_net_info int_vdd_1 -power \-nominal_voltages{1.2} -voltage_ranges[1.1 1.3} \-switchablecreate_power_net_info int_vdd_2 -power \-nominal_voltages{1.25} -voltage_ranges{1.1 1.3}create_power_net_info int_vdd_3 -power \-nominal_voltages{1.2} -voltage_ranges{1.1 1.3}create_power_net_info int_vdd_4 -power# Create power domainscreate_power_domain tcreate_power_domain a -object_list[get_cells PD0_inst]\-power_down -power_down_ctrl[get_nets a] \-power_down_ctrl_sense 0create_power_domain b -object_list [get_cells PD1_inst]\-power_down# Connect rails to power domainsconnect_power_domain t -primary_power_net t_vdd \-primary_ground_net t_vssconnect_power_domain a -primary_power_net a_vdd \-primary_ground_net a_vss \-backup_power_net vdd_backup \-backup_ground_net vss_backupconnect_power_domain b -primary_power_net b_vdd \-primary_ground_net b_vss# Set voltages of power netsset_voltage 1.15 -object_list{t_vdd a_vdd b_vdd}# Read SDC and other timing or power assertionsset_input_transition 0.0395 [all_inputs]set_load 1.0 [all outputs]# Perform timing analysisupdate_timing# Read switching activityset_switching_activity...set_switching_activity......report_power三. 关于报告一个标准的报告：Power Group Power Power Power Power ( %) Attrs---------------------------------------------------------------io_pad 0.0000 0.00