传感器选型（Sensor selection）.docVIP

传感器选型（Sensor selection） The pressure sensor is mainly used to detect the pressure of fluid or solid, and can carry out signal remote transmission. It is one of the most commonly used sensors in industrial practice. As a front end component of automatic control, it is widely used in various industrial automatic control environments, including petrochemical, paper making, water treatment, electric power, ship, machine tool and public equipment. Classification of pressure sensors: Piezoresistive pressure transducer When the varistor is pressed to produce resistance changes, amplified by amplifier and calibrated by standard pressure, pressure detection can be carried out. The performance of piezoresistive pressure sensor mainly depends on the pressure sensitive component (take out the varistor), the amplifying circuit, and the calibration and aging process in the production. Strain gauge: pressure sensor packaging process at present, will usually be the piezoresistive sensitive core made has the advantages of small volume, high sensitivity, and good stability, and the varistor with Hui Si Tong Bridge form and strain material (usually stainless steel) together, we can ensure that the pressure overload resistance type pressure transducer strong and strong impact pressure. The utility model is suitable for measuring the pressure change in a high range, especially when the utility model is above 1MPa, the linearity is good, the accuracy is high, and the utility model is suitable for measuring various materials compatible with strain materials. In terms of structure: Ceramic piezoresistance varistor with Wheatstone bridge form and sintering together. Its overload capacity is lower than that of strain gauges, but its sensitivity is high, it is suitable for measuring high range above 50KPa, and it is corrosion resistant and has wide temperature range. Corrosion resistant ceramic pressure sensor does not pass liquid, pressure directly on the anterior surface of the ceramic diap