1. PROJECT DESCRIPTION - Long Island Power …（1。）.pdfVIP

1. PROJECT DESCRIPTION The proposed Broadwater LNG terminal would be located in Long Island Sound approximately 9 miles (14.5 km) from Long Island and 10 miles (16 km) from Connecticut (Figure 1). The FSRU is designed as a modified LNG carrier to receive, store and regasify LNG. It will be moored in 90 feet (27 m) of water to a tower via a yoke mooring system (YMS). The FSRU will be free to weathervane around the tower in response to winds and currents. The mooring tower will be secured to the seabed by four legs with the structure covering a total area of 13,180 square feet. The FSRU is designed to have a double hull similar to a membrane tank LNG carrier. It will be 1,215 feet (370 m) long, 200 feet (61 m) wide and 80 feet (24 m) above the waterline, with 40 feet (12 m) of draft (Figure 2). Broadwater plans for LNG carriers with cargo capacities ranging from 125,000 m3 to 250,000 m3 to deliver LNG to the FSRU two to three times per week.1 Regasification capacity will allow for an average send-out of 1 Bcf/d and a peak sendout of 1.25 Bcf/d. Net storage capacity is 350,000 m3, equivalent to 8 Bcf. After revaporization, the gas will be transported via a 22-mile (35 km), 30-inch subsea lateral to the Iroquois mainline for delivery to Long Island, New York City and Connecticut. Figure 1 – FSRU Location and Area Infrastructure Connecticut