十八烷膨胀珍珠岩定形相变材料封装及隔热性能 王伟.pdfVIP

1242 CHEMICAL INDUSTRY AND ENGINEERING PROGRESS 2014 33 5 12 2 1 2 361021 361021 DSCFT-IR ESEM 60 20h 75% 97% 40% 10mm 15mm 230s4.2 500s6.2 25 15mm 360s4.3 TU 55 A 100066132014 DOI 10.3969/j.issn.1000-6613.2014.05.027 Heat-insulating property and encapsulation of octadecane expanded perlite shape-stabilized phase change materials WANG Wei12 YAN Handong2 1 2 School of Materials Science EngineeringHuaqiao UniversityXiamen 361021FujianChina School of Civil EngineeringHuaqiao UniversityXiamen 361021FujianChina Abstract A kind of shape-stabilized phase change materials(SPCMs) was prepared by soaking absorbing technology with octadecane as phase change materials(PCMs) and expanded perlite as supportive material. The PCMs and SPCMs were characterized by DSCFT-IR and ESEM. The surface of the SPCMs were packaged tentatively by the technology of wet-wrapping cement dry powder in order to reduce the possibility of melting leakage of PCMs in the cement matrix. The holding ratio of the octadecane absorbed in expanded perlite increased from 75 percent to above 97 percent after surface packaging SPCMs which were baked under 60 for continuous 20 hours. The heat-insulating property experiment results show that the lower surface time delay and the maximum temperature difference are 230 s4.2 and 500s6.2 respectively for 10mm thickness and 15mm thickness mortar board with 40 percent by weigh