填充板状定形相变材料蓄热槽蓄 放热特性实验研究 李香玲.pdfVIP

122 　　　　暖通空调HVAC 　2005年第35 卷第10 期 　　　　　　　　 / ☆ 北京工业大学　李香玲 　陈　超　蹇瑞欢　欧阳军 　对填充了板状定形相变材料、以水作为热媒的蓄热槽的蓄/ 放热特性进行了实验研 究;重 考察了热媒的流速、流动方向及进口温度的变化对蓄热槽蓄/ 放热特性的影响,认为在 蓄热过程, 热媒在蓄热槽内的流动方向宜上进下出,放热过程则相反;热媒进口温度和速度对 蓄热槽的蓄/放热时间都有影响,前者的影响更为显著。 　板状相变材料　实验　蓄/放热特性 Experimental analysi s on hea-t storage and di scharge cha racteristi cs wit h form-stabl e phase change material ★ By Li Xiangling , ChenChao, Jia nRuihua na nd Ouya ngJun Abstract 　Experiments hea-t storage and discharge characteristics in a hea-t storage tank filled with form- stable phase change material(PCM)and water as heat transfer fluid (H TF). Studies the effect of verif ing the velocit , flow direction and inlet temperature of H TF on hea-t storage and discharge characteristics of hea-t storage tank. The flow direction is from up to bottom in the hea-t storage process, and the flow direction is from bottom to up in the discharge process. The inlet temperature and velocit affect hea-t storage and discharge time, but inlet temperature affects more. Keywords 　form-stable PCM, experiment, hea-t storage and discharge characteristics ★Beij ing University of Technology, Beij ing, China 0 　 , , , ,, ,, , 。 。, O samu Miy atake Yasu shi K oi to 。 (95 ℃, 84 [2 ～3] , ,, ℃) 。 。 SBS 、 [4] 。,、 ;、 , 、。 , ☆ , , 1973 5 ,