装修简单流程汇总（Simple decoration, Flow Summary）.doc

装修简单流程汇总（Simple decoration, Flow Summary） Decoration all process and simple description worth reading (plagiarism + summary, for your reference) I. wall and top paint (interior wall coating) 1, remove the old plaster (new original putty layer or good quality can not eradicate the grassroots, to save the old wall such as sand; the real texture is loose should eliminate all 1:3 5--10mm thick cement mortar). 2, brush interface agent again. 3, wall cracks and joints with crack bandage (insulation wall, light partition wall should be filled with sand, paste dacron cloth or full nail plasterboard as crack processing). 4, batch scraping 821 putty, 2---3 times for wall leveling. 5, sandpaper polished, local rest, and then polished. 6, remove dirt. 7. Roll or coat the interior wall paint 2---3 times. Two, wallpaper, wall covering 1, remove the old plaster (new original putty layer or good quality can not eradicate the grassroots, to save the old wall such as sand; the real texture is loose should eliminate all 1:3 5--10mm thick cement mortar). 2, brush interface agent again. 3, wall cracks and joints with crack bandage (insulation wall, light partition wall should be filled with sand, paste dacron cloth or full nail plasterboard as crack processing). 4, batch scraping 821 putty, 2---3 times for wall leveling. 5, sandpaper polished, local rest, and then polished. 6, remove dirt. 7, and then brush varnish again. 8, with professional wallpaper glue plus latex paste. Three wall tiles 1, the eradication of the original wall tiles (if required). 2, 1:3 cement mortar, smooth 10mm thickness. 3, wall chiseling or napping treatment. 4, the wall pop-up horizontal and vertical lines. 5, the water does not bubble to tile with 1:2 cement mortar paste (positive corner edge angle bump). 6. White cement or joint sealant. Four, insulation wall 1, wall drill, nail into the wood. 2, wall fixed 30 * 40 pine keel. 3. Adding polystyrene board, fixing cement pressure plate or gypsum board. Five, li