双网卡均衡负载（Balanced load of dual network card）.docVIP

下载本文档

9
0
约3.7千字
约 7页
2017-07-24 发布于河南
举报
版权申诉

双网卡均衡负载（Balanced load of dual network card）.doc

1、本文档共7页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
5、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
6、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
7、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
8、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

双网卡均衡负载（Balanced load of dual network card）

双网卡均衡负载（Balanced load of dual network card） Linux, bonding Explain： Bind a multi block network card to a virtual IP, similar to the csico EtherChannel, to achieve redundancy or load balancing and increase bandwidth function. The kernel needs bonding support to see if it hangs on the bonding, lsmod command. The default 2.6 kernel bonding has been compiled into the M option, without the need to recompile the kernel. In fact, Redhat on bond, in kernel-doc there is a document, described in great detail, you can first see /usr/share/doc/kernel-doc-2.6.18/Documentation/networking/bonding.txt A: there is no need to reset the configuration method. 1 modprobe bonding miimon=100 2, ifconfig, bond0, 192.168.1.1, netmask, 255.255.255.0 3, ifenslave, bond0, eth0, eth1 Two: reset the configuration method that is still in effect. 1 close the physical network card to bind Modify startup items for ifcfg-eth0 and ifcfg-eth1 BOOTPROTO=none ONBOOT=no 2 build a virtual network card In the /etc/sysconfig/network-scripts/ directory to establish ifcfg-bond0, and modify the /etc/modprobe.conf file to achieve automatic boot mount. The /etc/sysconfig/network-scripts/ifcfg-bond0 configuration is as follows: DEVICE=bond0 IPADDR=192.168.0.193 NETMASK=255.255.255.0 BOOTPROTO=static ONBOOT=yes GATEWAY=192.168.0.3 The /etc/modprobe.conf configuration is as follows: Alias eth0 bnx2 Alias eth1 bnx2 Alias bond0 bonding Options bonding miimon=100 mode=1 (miimon is used for link monitoring. For example: miimon=100, then the system monitors the link status once every 100ms, and if one line is blocked, it goes to another line. Mode 1, standby mode, mode 0 is load balanced and bandwidth added mode Note: the above is the only way to do a group of bonding. If you do many groups, you can change to the following way: Alias eth0 bnx2 Alias eth1 bnx2 Alias eth2 E1000 Alias eth3 E1000 Install bond0 /sbin/modprobe -a eth0 eth1 and /sbin/modprobe bonding Alias bond0 bonding Install bond1 /sbin/modprobe -a eth2 eth3