中石北京 数控技术 第一次在线作业（China stone Beijing CNC technology for the first time online homework）.docVIP

中石北京 数控技术 第一次在线作业（China stone Beijing CNC technology for the first time online homework） Assignment The first question is used to select the YZ plane Your answer: C Subject score: 0.5 Score: 0.5 Annotation: processing plane selection instruction Second, the G00 instruction is not the same as the following instructions Your answer: D Subject score: 0.5 Score: 0.5 Annotation: interpolation continued effect instruction Third item () does not belong to point control NC machine tool Your answer: D Subject score: 0.5 Score: 0.5 Annotation: classification of NC machine tools according to the moving track The fourth instruction code used to specify feed speed is () Your answer: A Subject score: 0.5 Score: 0.5 Annotation: feed speed instruction The fifth axis of the revolution that rotates around the X axis is () Your answer: A Subject score: 0.5 Score: 0.5 Annotation: rotating axis of machine tool In the sixth question auxiliary function, the instruction for unconditional program pause is () Your answer: A Subject score: 0.5 Score: 0.5 Comment: program pause instruction Seventh, in the NC machine tool coordinate system, the axis of the parallel machine tool spindle is () Your answer: C Subject score: 0.5 Score: 0.5 Annotation: linear coordinate axis of machine tool In the eighth question, the rough machining of the contour is done with a tool of 12, requiring a margin of 0.4, and the offset of roughing is () Your answer: C Subject score: 0.5 Score: 0.5 Annotation: tool radius compensation The ninth question, according to ISO standard, NC machine tools in programming using () Rules Your answer: B Subject score: 0.5 Score: 0.5 Annotation: linear coordinate axis of machine tool The tenth item is classified according to the control trajectory of machine tool movement, and the machining center belongs to () Your answer: C Subject score: 0.5 Score: 0.5 Annotation: classification of NC machine tools according to the moving track The eleventh question is correct, but at the time of