日本钢筋混凝土结构大震设计方法介绍.pdfVIP

第 40 卷 第 6 期 建 　筑 　结 　构 2010 年 6 月 日本钢筋混凝土结构的大震设计方法介绍 1 2 叶列平 , 　孙玉平 ( 1 清华大学土木工程系 ,北京 100084 ; 2 日本神户大学大学院工学研究科 , 日本 6578501) [摘要] 　介绍日本钢筋混凝土结构二阶段抗震设计方法 ,重点介绍第二阶段大震设计方法 。该方法包括 ,第二阶段 的抗震设计 目标 、地震作用需求 、结构屈服机制设计 、结构屈服机制保证设计 , 以及第二阶段结构分析方法 、轴压比 限值 、材料强度取值和非结构构件的设计要求等 。方法可供建立我国大震抗倒塌定量计算方法参考 。 [ 关键词] 　钢筋混凝土结构 ; 抗震设计 ; 大震 ; 屈服机制 ; 轴压比限值 Introduction of design method for RC structures under severe earthquake in Japan 1 2 Ye Lieping , Sun Yuping ( 1 Department of Civil Engineering , Tsinghua University , Beijing 100084 ,China ; 2 Department of Architecture , Graduate School of Engineering , Kobe University , Kobe 6578501 , J apan) Abstract :The twolevel seismic design methodology for reinforced concrete ( RC) building structures in J apan is introduced. The design method of level 2 corresponding to severe earthquake is presented , which included the acceptable design index , the definition of the earthquake force , the design of failure mechanism for the structure , and the ensuring design of structuresfailure mechanism. The corresponding analysis method , axial force limit of RC columns , concrete and steel strength value and the performance the nonstructural element under the second level earthquake intensity are introduced. The method is helpful for developing a methodology to conduct quantitative anticollap se seismic design for RC buildings under severe earthquake in China . Keywords :reinforced concrete structure ; seismic design